Taylor Made Boat Flag Pole with Charlevoix Flag Clips - 36" Long - Anodized Aluminum

Video Transcript for Review of Taylor Made Boat Accessories - Aluminum Flag Pole - 369918

Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the tailor made boat flagpole. This is going to have the Charlevoix clips to keep your flag in place. So that's just going to be these kind of curly Q looking clips with little teeth on the other side, to keep those on the pole. There's also a rubber O-ring to keep that from sliding up on the poles.

So you can make sure that your flag stays nice and taut. It's not going to crumble up or sag down or anything like that. So it'll stay flying nicely. Now, this pole is made out of a Marine grade, anodized aluminum, and I'm trying to bend it here and you can see there's really no give to it. So even in heavy rain, winds, it's not going to bend or flex, so it'll stay nice and straight.

It's also resistant to any kind of corrosion.So it's going to be great for both freshwater and saltwater use. The clips are, as I showed you easy to adjust. You can also turn these or push the piece out to the side and then remove it if you'd like to, to switch it out for something else, maybe, but that will also just help keep your flag in place. As far as the overall dimension or the overall size of this from end to end, it's about 37 and a quarter inches tall. If we go from the very end here to just below the cap, 36 inches.

Our clips are going to come out from the pole by about an inch and a half. Overall, they're about two and three quarter inches long. The diameter of our poll is going to be three quarter inches. That's pretty much going to do it for our look at the tailor-made boat flag pole with flag clips. If you want to get any other accessories or flag to go with this, we have a lot of options available here at etrailer.com.

So you should definitely check those out. Thanks for watching.